Auction ends | over |
Bids | 1 |
Current price | ¥1,499 $11 |
Start price | ¥1,499 $11 |
Buy-now | ¥1,499 $11 |
Consumption tax | 0% included |
Seller | raincoats8888 +488 |
Condition | New |
Start time | 2023-06-24T07:38:35+09:00 |
End time | 2023-06-25T08:33:55+09:00 |
Auto-prolongation | Turned off |
Lot number | q1071543481 |
Seller position | Osaka prefecture |
Lucit Bit Carbide Bar Router Bit Carbide Drill Polishing Tungsten Tungsten Processing Rotary Bar Tip Marine Cylinder Type 10 Set exclusive plastic case with a shank diameter 3mm Head diameter 6mm
It will be a set of 10 carbide tools of the high -speed rotation tool. It can be used for various purposes such as cutting processing, drilling, polishing, and removal work, and has a very strong strength of the blade, and can demonstrate stable performance for a long time. The material is a special steel containing tungsten with excellent hardness, strength and polishing resistance. It adopts a carbide joint that is adopted in fields such as cutting tools and molds that require wear resistance, and is also prevented inadvertent bite, so high -quality processing with excellent control is possible. Tungstenber is a tool that attaches a cutting edge to a carbide to cut metal and industrial materials. It is a carbide drill using very hard tungsten steel. We will demonstrate the power of cutting and polishing metals (iron, stainless steel, aluminum). As the main steel material, it responds to a wide variety of needs when processing general steel, forecasted steel, stainless steel, cast iron, titanium, nickel, copper/copper alloy, aluminum, plastic, thermet, etc. The head shape of this product is a tip -circular cylindrical type that is mainly ideal for cutting.. As a main feature of carbide drills, it is used by attaching it to the tip of a grinder (rotating tool) based on air and electricity. It is a preferable use that is used by the recommended rotation speed depending on the blade diameter, and is not pressed more strongly than necessary. In addition, there are some points to note when using, so you need to be careful when processing and polishing. 1. In order for a carbide drill to demonstrate the highest ability, it is necessary to adjust it to the optimal rotation number for cutting.. 2. Use it with a low rotation number, the harder material.. 3. The smaller the carbide drill, the higher the rotation speed. 4. When using, constantly move and apply light pressure.. 5. Use in the speed of rotation below the optimal rotation number will lead to blade loss.. 6. Use used tools and collets can lead to blades.. 7. Do not sink the carbide drill 1/3 or more of the tip length.. 8. If the number of revolutions is too fast, the blade wears.. The lute bit is used for metal processing such as metal cutting and burr removal. It is an advanced tool to attach to a dedicated hand grinder (air grinder). Long life and high -speed production are realized by using high -hardness and high -strength carbide as a material. Contribute to customer cost reduction and increase production. The cut life of the carbide drill (the number of cuts that can be cut) is about 2 to 10 times the steel cutter. Also, even if the edge can be cut and cannot be cut, it will return to the same sharpness as a new one by sharpening the edge (re -polishing). If you use it for more than a year, it is more advantageous at total cost than a steel cutter. Also, when used, wear appropriate protective equipment such as protective glasses, dust -proof masks, protective gloves, and soundproof protective equipment (earplugs).
Brand newunused
■ Delivery fee (nationwide uniform) ■ Yu -Packet: 250 yen Letter Pack Light: 370 yen
* For two or more bundled shipping, it depends on the product, so
Sorry to trouble you, but please check with us before purchasing.
I'm sorry, but we may not be able to respond immediately after a successful bid. We will try to respond as soon as possible, so
Please understand in advance. In addition, shipping is not performed on weekends and holidays. Please also note.
Time | User | Price |
No bids | ||
No questions.