|
|
[Type 6MB/RE] Mercedes -Benz car General -purpose fuel cap cover [Aluminum red/alumite finish] << Mercedes -Benz logo mark with cut sticker/Missed product> European and American specifications/Braga [Type 6MB/RE] Mercedes -Benz car General -purpose fuel cap cover [Aluminum red/alumite finish] << Mercedes -Benz logo mark with cut sticker/Missed product> European and American specifications/Braga★ Free shipping Campaign is underway / Free shipping nationwide! Okinawa/remote islands are also OK!
Shipped by Japan Post [Click posts]! * I will throw it in the post / mailbox. * No cash on delivery (in the case of cash on delivery, shipping 580 yen and cash on delivery fee of 380 yen will be charged separately. )[Compatible vehicle type]
<< Mercedes -Benz car >> General -purpose product* The shape may not be possible because the shape is different depending on the model, year, grade, etc. Be sure to check your genuine refueling cap before purchasing after checking the following compatible examples and compatible sizes before purchasing. * Even if the shape of the genuine refueling cap is matched, some of the cover of this product interference inside the fuel supply port door, and some models do not close the door.. Be sure to provide temporary adjustments before mounting with double -sided tape, and check if there is any problem with opening and closing the filler door.. * Gasoline vehicles [high -octane regular share] can also be installed on diesel vehicles [light oil]. * This product is only for genuine cap with a fall prevention code on the side. Therefore, it cannot be attached to the cap or cord with the fall prevention code on the upper surface.[Mercedes -Benz car/general -purpose product]● A class ● B class ● C class ● E class ● G class
● M class ● S class ● V class ● R class
● CLA class ● CLS class ● GL class ● GLA class
● GLC class ● GLK class ● SL class ● SLK class
● Other Mercedes -Benz cars [Type 6MB/RE] Mercedes -Benz car General -purpose fuel cap cover [Aluminum red/alumite finish] << Mercedes -Benz logo mark with cut sticker/Missed product> European and American specifications/Braga■ The finest aluminum shaved aluminum processing specification!
■ This product is an external product made in Europe and the United States. ■ Easy installation! Strong double -sided tape stop. ■ With Mercedes Benz logo mark mark with sticker ( * Memorial/external product) [Made in Silver Logo Mark]
■ The unique texture and color unique to aluminum aluminum processing are outstanding!
■ The refueling cap that is normally bare is shining at once and claims to be!
■ The impact when the refueling port is opened is enormous!※Note
・ The sticker will be set and shipped to this product as a customer injection after ordering. ・ The logo mark is pasted with a powerful glue, but it is a cutting sticker to the last, so it may be slightly peeled off depending on the aging and usage status. Please note. ・ Be careful not to apply gasoline, light oil, etc. on the sticker when refueling.. Also, be careful not to touch the sticker part as much as possible during refueling work. Especially when you touch it with your nails, it is easy to peel off.■ This product color /Red [RED](Aluminum alumite finish)
■ This product* Please refer to this product refueling cap cover for each size drawing.● External size / φ82 x height 29.5 (mm)
● Internal size/φ75 x height 26.5 (mm)
● Opening and closing knob portion/75 × 21.5 vertical (central part 17.5) x height 18.5 (mm)* Caution/External size of your genuine refueling cap can be mounted on cars within each internal size. Please be sure to check before purchasing.[Genuine refueling cap compatible size]* Please refer to the following [Genuine refueling cap compatible example/compatible size]..● External size/about φ74mm or less x height 25mm
● Opening and closing knob size/within 67 mm in width x within 21.5 mm (within 16 mm in the center) x height 20.5 mm* Note/Please be careful about the horizontal size of this opening and closing knob.. It cannot be attached to the vehicle type that is extremely small in the horizontal size of around 54mm. Other products [Type 7] Series."Precautions for mounting work >>
* Because this product is imported overseas, there are some processing, small scratches, dirt, burrs, and protruding double -sided tape. Please note. * This product is a general -purpose product. Not everything is covered. Therefore, some gaps can be seen around the mounting part. Please note. * Mounting work should be performed on a wide flat ground other than the road. * Be sure to stop the engine and apply the side brake before going. After that, open the filler door. (1) Be sure to clean and degrease the genuine refueling cap surface before mounting. * Please remove gasoline, oil, dirt, etc. neatly.. (2) Be sure to provide a temporary match between this product and the genuine refueling cap before mounting. After that, close the refueling port door once and check the opening and closing with the provisional match. * Even if the shape of the genuine refueling cap is matched, some of the cover of this product interference inside the fuel supply port door, and some models do not close the door.. Be sure to provide temporary adjustments before mounting with double -sided tape, and check if there is any problem with opening and closing the filler door.. (3) After that, remove all the protective cover of the double -sided tape on the back of this product, and paste the genuine refueling cap as much as possible while paying attention to not touching the cutting sticker part. * When pasting, please be careful not to touch the cutting sticker. * Please note that if you attach it on one side and attach it, it may come into contact with the refueling door door. * If you warm the double -sided tape part with a dryer, then paste it to increase the adhesive force. If the temperature is particularly low, be sure to warm up before installing. * Since the double -sided tape cannot be paste, please be careful with the paste work. (4) After paste, apply a beautiful towel etc. on the cover surface and press several places from directly above.. * Please do not do it because the sticker may come off if you slide and press it. * Adhesion stability of double -sided tape is usually 1 hour. Until then, please do not touch as much as possible. It takes about 24 hours to fix it completely. (5) Finally, close the refueling door door and finish the work.● Western shop original accessory parts! Made -to -order product!
● European and American specification Mercedes -Benz Logo Mark Mark Cutting Sticker Set! Silver logo mark! ( * Customer order)
● With various cutting sticker logo & mark etc.! Silver logo mark!
・ GASOLINE ・ CAUTION ・ Gas station mark
・ LOCK ・ OPEN ・ ← → arrow mark
● Luxury lightweight aluminum body! The surface is an excellent alumite red processing finish!
● Mercedes -Benz car exclusively design! Outstanding feeling! Easy mounting vehicle surface tape stop!■ Import publisher: BRAGA [Braga]  [Type 6MB/RE] Mercedes -Benz car General -purpose fuel cap cover [Aluminum red/alumite finish] << Mercedes -Benz logo mark with cut sticker/Missed product> European and American specifications/BragaOverseas shop original [Type 6MB/Re] Mercedes -Benz car General -purpose refueling fuel cap cover. Furthermore, it is a very stylish and sporty exterior part with a Mercedes Benz logo mark cutting sticker. This product is shaved and molded with solid aluminum solid wood, and high -quality alumite processing is applied to the surface. Parts that I don't usually claim at all claim to shine at a stretch. By all means, how about this Mercedes -Benz general -purpose refueling fuel cap cover as a custom item for your car!
I think you can enjoy a trendy and sporty car life.  "Notes"
* Because this product is imported overseas, there are some processing, small scratches, dirt, burrs, and protruding double -sided tape. Please note. * This product is not a genuine product. Overseas shop Original parts will be external parts. The sticker will be set and shipped exclusively for customers after ordering. Please note. * After installation, be careful when handling the cutting sticker part. Since it is a sticker to the last, be careful not to touch the sticker directly, hook it, or apply gasoline or oil when refueling or cleaning. It may come off. * Cutting stickers may be slightly peeled off due to aging and usage. Please note. * The color and texture are slightly different from the posted photo and this product. In addition, the surface of this product is performed anodized, so the light and dark vary considerably depending on how the light hits. Please note. * This product is a general -purpose product. Not everything is covered. Therefore, some gaps can be seen around the mounting part. Please note. * If this product is extracted after installation, the mounting part may be different depending on the number of installation days due to aging or different deterioration. Please note.★ Free shipping Campaign is underway / Free shipping nationwide! Okinawa/remote islands are also OK!
Shipped by Japan Post [Click posts]! * No cash on delivery * Throw in post / mailbox. ]
* Cash on delivery is not available. In the case of cash on delivery, all Sagawa Express costs 580 yen and a substitute pulling fee of 380 yen.* This product is limited. Please be sure to check the items described in the shipping fee of each product. * Payments are only credit cards, bank transfer, Yahoo! money/deposit payment. * Delivery date / time cannot be specified. * Luggage loss after post throwing cannot be compensated. * You can check the delivery status of luggage with the tracking service. * All purchases of 8,000 yen (tax included) will be shipped with free shipping of Sagawa Express.■ About delivery date
Normally, it is in stock, but due to the sale on other sites, it may suddenly be out of stock. In that case, please note that we may take time to ship. If you are in a hurry, please be sure to check the delivery date before purchasing. |
|
|
