Engine type outdoor unit 4 cycles 53.2cc high power 2 horsepower! The strongest class without a license! Rubber boat fishing boat small vessels! 4 stroke
| Auction ends | over |
| Bids | 28 |
| Current price | ¥11,000 $76 |
| Start price | ¥100 $1 |
| Consumption tax | 0% included |
| Seller | gtstt3233 +2653 |
| Condition | New |
| Start time | 2024-03-24T22:40:20+09:00 |
| End time | 2024-03-31T22:55:20+09:00 |
| Auto-prolongation | Turned on |
| Lot number | r1129883871 |
| Seller position | Kyoto |
| ◆ Engine type outdoor unit 4 cycles 53.2cc high power 2 horsepower! The strongest class without a license! Rubber boat fishing boat small vessels! 4 stroke ◆ | |
| Description of item |
● You can go smoothly without all the engine type power! ● It can be locked in each of the accelerator, so it is easy to operate! ● Axel lever height can be adjusted at a free position! ● The steering is easy with one hand! ● It can be easily attached to rubber boats and Fed boats! ● 4 -stroke type featuring high durability, fuel consumption, low noise, and exhaust gas screen compared to 2 strikes! ● 2 horsepower class that does not require a license 53.2cc engine! ( * Because it is the strongest class, there are potentials that can get 2.5 to 3 horsepower depending on the cab tune and fuel adjustment). [Product content]: Engine -type outdoor 4 cycle 53.2cc [Outpatient type]: Engine propeller type [Engine type]: Spark plug type 4 cycle [Cooling method]: Air cooling [Displacement]: 53.2cc [Start method]: Recoil type [Used fuel]: Gasoline (mixed oil is not used) [Engine lubrication oil]: 4-cycle only oil (SAE 0W/10W-30th) [Fuel tank capacity]: 1.2L [Color]: Black [Size 1 approximately]: 112cm in length (propeller edge from the top of the engine), 63cm in width (engine end from the accelerator edge), depth 33cm (engine end to engine end) [Size 2 Approximately]: Axel lever length 50cm [Size 3 contract]: propeller diameter 180mm [Weight about]: 10kg (overall) * No oils and fats ○ Notes ○ * Be careful of burns because the engine gets hot when you use it or immediately after that.. * Please use in the proper rotation range without unnecessary engine rotation when used. (To prevent engine injury and burns, it is usually used in the semi -opening area of the accelerator in normal times) * Please perform rust prevention maintenance before and after use.. ※ Please refrain from remodeling / original purpose / strong impact. * Please note that we will not be liable for any trouble, damage, or loss due to the use of this product. * Please note that it may be changed without notice for improvement such as specifications and designs. * Please note that there are cases where there is a small difference between the color and shape from the real thing because the photo is a reference example. ○ At initial use ○ * When the product arrives, check the operation of the engine first before assembling. The procedure to start the engine 1: Insert fuel and engine lubrication oil. 2: Press the pump and turn the fuel into the carburetor. 3: Open the chalk (Turn on the upper and lower lever next to the air cleaner box (mainly lower, such an LLL mark side)) 4: Pull the coil vigorously and turn it. (Normally, it will take about 5 to 10 times) Please refer to the photo explanation for the procedure to start the engine. * If the engine does not start at this stage, it may be necessary to have a ignition system recognition or a carburetor / throttle fine adjustment. * Please use after confirming that the engine starts.. * At the time of the factory, the operation of the engine is checked, so there may be a small amount of fuel left inside. * If you want to turn off the engine, press the button on the lever at hand (off side depending on the model) or close the chalk. * If you are not familiar with the engine mechanism, please check the operation and operate after receiving advice to those who are familiar. * Please note that it is not possible to guide you to the operation method and procedure individually. [Other / Regarding transaction details] ◎ We will respond to initial failure for 3 days after the product arrives.. (In the case of initial failure, we will respond to replacement or parts supply. ) ◎ In the case of parts supply, it may take some time to procure parts.. ◎ I am very sorry, but the product is possible, but the shipping cost for exchanging, supply, etc. will be paid.. ◎ In addition, damage and processing that are not caused by products, such as usage that cannot be considered normally or in poor environment, are not eligible. ◎ Since the initial failure correspondence is only for the product, we do not take any responsibility for other accompanying damages or accidents. ◎ Returns and refunds are basically not possible after the exchange. ◎ Please understand in advance for fine scratches and outer box stains on the product.. (Mild dents and scratches that do not interfere with use will not be complained.) ◎ The shipping fee will be the shipping fee listed on the auction page. (By only the original payment shipping, it is not possible to specify the shipping company, specify the date and time, or pick it up directly. ) ◎ This is a large frame product, so specifying the delivery date and time is basically not possible.. ◎ In the case of multiple sets, the shipping fee will be charged for each set.. ◎ After a successful bid, you can contact us within 48 hours, and only those who can pay within 2-3 days should bid. (If you can not do it, please note that we will delete it for the convenience of the highest bidder. ) ◎ Bidding equal will be able to agree with the above contents. |
| Payment Method | ■ Yahoo! か ん た ん settlement of accounts |
| This guide is an exhibition support tool ■@Immediate Sale -kun 3.20 ■ It is created in. | |
| Time | User | Price |
| No bids | ||
No questions.
