for Herman Miller Nelson ́s thin-edge beds (George Nelson) & Simmons Bespoke Not for resale Bespoke For those who care about sleep and furniture
| Auction ends | 6 days |
| Bids | no |
| Current price | ¥2,000,430 $13,718 |
| Start price | ¥2,000,430 $13,718 |
| Consumption tax | 0% included |
| Seller | skyneet00 +468 |
| Condition | Used |
| Start time | 2024-04-30T09:54:58+09:00 |
| End time | 2024-05-07T21:50:06+09:00 |
| Auto-prolongation | Turned on |
| Lot number | r333032656 |
| Seller position | Tokyo |
Nelson ́s thin-edge beds for Herman Miller George Nelson Genuine Simmons (Simmons) Purchased by himself Rare
We are pleased to offer a bet on George Nelson.
This bet is less than 5 in Japan! I heard from a person in Modernica a few years ago that only a few were made (I remember the number of productions, but they said that the number of productions was really small!).. ).
As far as I know, I have seen it used in commercials by stylist Mr./Ms.'s personal belongings.
I think that the other few are used by me and others, but I think that they are quite rare because they are thought to be overseas.
The purchase will be in '98 or '99.
The explanation will be very long from here, but I hope you will read it.
When I was commuting to school by bus, I always looked at this bed of the now-defunct MODERNICA on Meguro Street.
I didn't know what the designer was, I was just curious and wandered around in front of the store, and I hesitated to enter... Really.
As a teenager, I wanted a product that didn't even have a price on it... More than that, I felt like I was in love with this bet and craved it.
At that time, it was still mid-century, just before the furniture boom, and even if I said that Perriand's furniture was the best, everyone said "pop~".
I went to Perriand's place, and it was a time when there was no internet, so I relied on books. After all, where can you look? I really didn't know, and I was too exhausted to buy it..
That's when I came across this bedding that I always looked at from the bus.
It was simple and Japan, and at first I thought it was Perriand's (Perriand was one of the people responsible for the revival of Japan's interiors. )
At that time, the only thing I remembered strongly was a photo of a chaise longue inspired by the tatami mat, which is closely related to Japan culture.
The wicker headboard, maple wood (maple (autumn leaves)) on the frame, and thin white steel pipes give the illusion of floating inside from a distance.
Let's get into the description of the bet.
At the time of purchase, it was only a frame for the bet. In terms of size, it will be double.
Width 1395 mm× length 2300 mm (inner frame 2150 mm + headrest depth 155 mm (due to slope)SH (seat height) 580 mm (bed thickness 130 mm)
The above size is an amateur measurement, so the pure size will be slightly different. please note that.
At the time of purchase, the bed mat was sold separately, only the frame was sold.
At that time, I didn't have the capacity to buy a bed mat ... In fact, I thought it was included in the purchase price together....
I started to feel like I wanted to use it with a bed mat, and from there,It took five years to find and purchase the best new bet mat, and it seems that it cannot be purchased through the normal route of "Simmons". (Product number product not sold).
Now you can finally use it ~ ( * '艸') I waited with a long neck. But... It's so soft that it sinks. There are no slats, and the mat is soft, so it will be discontinued for a long time..
I went to Simmons Gallery Tokyo to ask Simmons to make a special order for Sunoko, but I was told that it was not possible to specify the wood frame or material, so this one was made by a person who can make furniture from a carpenter Mr./Ms. and can frame it (Draft by yourself, specify the direction of the wood and the grain, and the wood frame and fold it.).
The production period of Sunoco is about two months. Since it is a wooden frame, there are no nails or screws.
In addition, the material is the same maple wood (maple) as the frame. The surface of the wood is not that wide.
Nearly 10 years have passed since I purchased it by the time it was completed, and the usage period is about 3 months(Due to work, I often can't go home for more than a week ....).
When it is completed, I was thinking that it would be the best room next time~, but from there, what is the point of having something that has not been used for more than 20 years? I didn't understand it and decided to sell it to someone who really wanted it.
The pain and fraying of the rattan headrest can be seen in the photo, but it is almost non-existent.
And, of course, you can also get new braiding repairs. There is a price....
It is in the state where the slats are placed. With or without this slat, the performance will change greatly.
It is separated by two sheets, but there is no top, bottom, front and back.
It is quite well made, so it has a weight (thickness 30 mm. ).
With a bed mat on top of a snook. In fact, the mat is rarely used.
That's why the vinyl is hanging.
The mat is also quite heavy. I don't have the strength, so it was quite difficult to lift.
Condition of the headrest. I think it's a good feeling. I think that you can also check the grain (wood grain) firmly.
As I will tell you first, you cannot change the location of the headrest.
To be precise, it is wood, so you can change the location, but please stop because there is a screw hole and it will not fold and it will damage the wood.
In addition, it can be used without a headrest, although it is natural.
It's also beautiful.
The lower legs and headrest are fastened with screws (at the time of delivery, the legs and headrest will be removed and delivered. ).
It looks like such thin legs, but there is no creaking. The reason is that it is well built and heavy.
The frame alone weighs a lot.
This is BEAUTYREST by Simmons. In fact, it is said that it is not sold (model number).
As I mentioned above, the number of photos is limited, so I think there are some parts that cannot be conveyed.
If you have any questions, please feel free to contact us.
You can't use it without placing a slat..
The fabric part is very soft, so you won't be unable to sleep, but it is much more comfortable to sleep on if you fold it to improve breathability and use a slat..
For those who are interested!
This bed looks much more beautiful if you use it to open up a space around the bed instead of placing it in a narrow place.
It looks good in both Japanese-style and Western-style rooms, but it is best in a modern, sophisticated, and simple space.
It may not be an exaggeration to call it Japanese modern style, but it will be a masterpiece bet.
Winning bid price,Shipping costs are also expensive.It is not a price that ordinary people can afford..
It is not a perfect thing like the one in the store, but since it is owned and folded by an individual, there may be stains over time.
There is no difference between the image and the current situation (of course, there are no flashy scratches, dents, etc.). ).
However, we would appreciate it if you could consider that the furniture is more than 25 years old.
As I mentioned earlier, the period of time when it was not used is much longer.
dear
Ms. Perriand is my interior design teacher, and even now that she has passed away, I still feel strongly about her.
I was able to meet you (in the magazine) and you are the only person who planted the seed of sense in me.
Please, rest in peace....
It's been a long time, but thank you.
Notice
The items on display are the bed frame itself, the slat, and the bed mat. Other items shown in the photo are not included (including the publication magazine). ).
We will inform you about the shipping fee.
https://www.ikedapiano.co.jp/ ← I remember that it was brought here before, so I will include the contact information for inquiries about shipping fees. the size of the goods,Width 1395 mm× length 2300 mm (bed frame (not including headrest and legs). It can be disassembled, so you can carry it out by hand.. The weight of the bed itself is unknown)), the width of the mattress is 1395 mm× the length is 2300 mm× the thickness is 130 mm..
Contents of inquiry, removal by crane from the 3rd floor (It was impossible to carry out the elevator and stairs. I think you can give me a rough guideline at the questioner's residence from Tokyo. Thank you.
Perhaps the mattress is flexible and can be carried out from the front door.
I think that it is possible to carry out the slats from the entrance, but since it will be done with a crane, the contractor may prioritize efficiency in the work of hanging together.
Please note that it will take a long time to ship. Also,Shipping charges are paid on delivery.Schedule and fold.
There are many points that are not satisfactory, but I would appreciate it if you could confirm them.
| Time | User | Price |
| No bids | ||
