Marshall Marshall ◆ JVM410H Kai 100W ◆ Custom available ◆ 4 Channel Independent Digital Riverb ◆ Vacuum tube tube amplifier headstack ◆ Ketner
| Auction ends | 3 days |
| Bids | no |
| Current price | ¥539,800 $3,706 |
| Start price | ¥539,800 $3,706 |
| Buy-now | ¥539,800 $3,706 |
| Consumption tax | 0% included |
| Seller | ufutu193 +93 |
| Condition | Used |
| Start time | 2024-04-24T22:58:34+09:00 |
| End time | 2024-05-01T22:58:34+09:00 |
| Auto-prolongation | Turned off |
| Lot number | s1122495398 |
| Seller position | Osaka prefecture |
It is a custom product of Marshall JVM410H.
In shooting, the loading box is applied to the loading properly..
Connected the guitar, the knob on the front responds, the switch reacts, the switch LED is not cut, the color is switched, and that the switch is switched with a foot switch..
Since the system has already been broken, the back terminal is only 8Ω speaker out and only F/S..
Before the system was broken, I used Send/Return, LINE OUT, MIDI, etc., but I didn't feel any problems when I used it last..
There is no gully that I am interested in at the time of exhibition.
There is a little noise, but it has been around since the purchase.
It is a top -class high -gain amplifier among Marshall, so it feels like this..
However, I wanted to keep the noise as low as possible, so I was applying noise reduction..
The position of the knob was zero or turned over, and it was kept in mind so that the impact on the sound was reduced as much as possible when reused..
One knob is out of stock, the gold part of the head of the knob is missing.
The foot switch has a little scratch, but it was originally attached..
Since I was linked to the rack system in the Providence foot switch, I took it out of the box for the first time to check the operation this time..
The front is replaced with the original acrylic panel and the LED is used like Hughes & Kettner..
There was no noise caused by LED conversion, but as a countermeasure in the event that it occurs depending on the environment, the LED can be easily attached and detached with a coupler, so in the case of recording, just in case. It is also possible to cut.
If you want to change the color of the LED, you can change it by replacing it with your favorite color..
Also, if you make the current acrylic panel as a sample, you can replace it with your favorite panel..
It is a snake leather specification.
I don't think it's noticeable at a glance, but there are some parts that have been peeled off due to aging, so if you are worried, please repair it yourself..
The top and back panels are also replaced.
Although it is a thin and light material, it can not be said that the strength is high, but since it is made of flame -retardant material that does not burn even if an iron is placed, there is no need to worry about burning at the temperature of the amplifier..
It's not like throwing, and I don't think it will break if you use a common sense transportation method..
I had a spare panel for cracking, but I had never used it for years and never broke..
The genuine front, top, and back panels are also left, so it is possible to restore them, but I do not know if it can be returned with poning..
If you are restored, please devise yourself and install it..
The vacuum tube has all four power tubes to MULLARD EL34 PX29.
Bias adjusted at the shop.
Only two pre -tubes have changed to SOVTEC 7025/12AX7WA.
You may have changed the shield cover, but it has not been confirmed until removing it, so it has not been confirmed..
Normally it doesn't let me do that, but since I bought a vacuum tube on my own route, I always put it on this amplifier and bought it if I liked the sound..
At that time, when the engineer replaced, he said, "The shield cover is too hard to come off", so I tried to replace it at least and compare the sound..
I don't remember whether I replaced it as it was or if I didn't like it so much..
However, since the vacuum tube is a consumable item, basically, please consider all the replacements in order to understand the accurate state yourself..
We look forward to the bidding of those who can use it for a long time while repairing even if there is a defect or a defect..We will paste the invoice directly to the original box and ship it.
The cushioning inside is left as it is at the time of purchase, so seal it in the photo..
Please understand that it may take some time to arrange a shipping company because it is a large amplifier..
In addition, it is up to the driver in charge to decide whether to pick up in the end, so please note that there is a possibility that the shipping company will be changed if you do not pick up..Since it is not a trader, it will be exempted in the event of a transport trouble.
If you have any requests for packing, be sure to ask a question in advance and get the agreement between both sides before bidding.
We will not be able to respond even if you contact us about packing after a successful bid, so please bid after being convinced.If you are severe in condition, please refrain from bidding.
I need your help by a no claim no return.
If you are going to make a credit, be sure to check the credit card limit before bidding. If you are exceeding the limit, please check with your credit card company to ask your credit card company to temporarily increase the limit only for this payment, and then bid. I couldn't use a credit card, so it's a problem to let me cancel, so if the limit is not enough or you can not raise it, please consider it in cash. Since you may be misunderstanding the limit, please definitely quit bid without checking the credit card limit you are going to use.
It is possible to hand it over, but there are some conditions. First of all, as soon as the delivery date is decided, the payment procedure will be completed as soon as possible, and we will contact you with your smartphone on the spot. You said that you'll do it as soon as you returned to the past, and some people couldn't get in touch. I'm not in a hurry to deposit, but I would be grateful if you could understand it comfortably.
Since it is exhibited with no claim no return, please do not look at the actual thing and do not cancel.
The delivery location is Kadoma City, Osaka Prefecture.
Regarding the schedule, we will make an effort to make convenience within one week after the bid of both sides. Please note that if there is no convenience between both parties within a week, we will respond to shipping. If you are absolutely troubled by shipping, please refrain from bidding.
If you wish to hand over all of these, please let us know the third desired date after a successful bid.. If you can't get it until the third desired date, or you definitely don't like shipping, please refrain from bidding.. If there is a possibility that it will be shipped, you do not have to put it up until the third desired date..Only those who can agree with these should select "Handing (with conditions)" for the delivery method..
Please ask a question if there are points that are not listed or difficult to understand..
Marshall JVM410H Vacuum tube head amplifier
Brand: Marshall
| Time | User | Price |
| No bids | ||
