KLARK TEKNIN Translation Pa Rico DN410 operation [3 months warranty]
| Auction ends | 4 days |
| Bids | no |
| Current price | ¥43,000 $296 |
| Start price | ¥43,000 $296 |
| Buy-now | ¥43,000 $296 |
| Consumption tax | 0% included |
| Seller | kiyohamu0211 +6643 |
| Condition | Used |
| Start time | 2024-04-25T23:26:41+09:00 |
| End time | 2024-05-02T23:26:41+09:00 |
| Auto-prolongation | Turned off |
| Lot number | u1100435201 |
| Seller position | Hokkaido |
KLARK TEKNIN Paraico DN410
ATaDiOhConstantNumberofPaddyLaACo
It is the 3rd HOT device, but we have changed to No. 2 in RCA-XLR.
10 bands when using stereo when using a band.
Clark technique DN410 is a 2 -channel center circumference between 20Hz and 20kHz, a set of 5 pairs of channels.
+ 15dB boost-25dB cut with wave number and 2 octave from 12/1 1 octave and band width
Is composed of a barrier bulb filter that can be selected. In addition, 10 babies in single mode
You can use the Don EQ/filter together in one channel. (I have a lot to pin)
+ 15dB boost-25dB cut with wave number and 2 octave from 12/1 1 octave and band width
Is composed of a barrier bulb filter that can be selected. In addition, 10 babies in single mode
You can use the Don EQ/filter together in one channel. (I have a lot to pin)
If you use two cars, it will be a parametric EQ for 10 stereo 10 bands, so you can make considerable corrections.
Is the channel -in -out switch on the equalizer and the filter circuit at the same time?
It will be separated. In addition, an LED indicator is dressed on the overload detected from all the equalizer circuits
It is provided. The ground lift switch is on the rear panel. Also optional
There is a Lonto cover and you can not change the settings inadvertently. Fail -safe relay is also equipped, and even if there is a problem with the power supply, the system bypass
I'm going to do. This relay is squeezed when the voltage is stable when the power is turned on further.
Designed to turn on the riser circuit. This is the output of noise when the power is turned on
Prevents.
It will be separated. In addition, an LED indicator is dressed on the overload detected from all the equalizer circuits
It is provided. The ground lift switch is on the rear panel. Also optional
There is a Lonto cover and you can not change the settings inadvertently. Fail -safe relay is also equipped, and even if there is a problem with the power supply, the system bypass
I'm going to do. This relay is squeezed when the voltage is stable when the power is turned on further.
Designed to turn on the riser circuit. This is the output of noise when the power is turned on
Prevents.
There is a translation5 bands when using stereo is 10 bands, but the A -B band in the photo is poorly operated, so when using a stereo, 8 bands are not a problem, so it is cheap with a translated operation.
But the manual is Japanese PDF
323400 yen including tax It is AC110V, but it can be used without any problems with 100V
Regarding the connection of the device, it is not a problem because the mixer and the power amplifier may be used in the interruption in the site such as SR, but at this time, there is no problem because the experience of the operator and the level monitoring can always be performed. If this device is used for home use this time, never make such a connection, be sure to make a pre -main or preamplifier accessory circuit (there are few remaining devices) or connect to the tape monitor circuit to the amplifier. Please use the source (EQ cancellation) play (EQ in), and this connection contains a certain level of signal before the volume adjustment, so you can prevent clips and noise increases due to lack of level. When squeezed, the noise of the device up to that point will also be lowered at the same time as the signal, so it is the correct connection, but if this is connected between the preamplifier and the main, the volume is 0, and even if it is 0, noise comes out from the EQ. The power amplifier is amplified only the noise, so the residual noise comes out from the SP, the volume is low, and the remaining noise is noticeable, and if the volume is increased, the EQ amplifier clips, so it is a wrong connection.. The manufacturer-because it would be good to sell, so it was sold without a hassle, or even if it connected to the pre-with the main, it was OK, so those who could not use most of them EQ, enhancer, expander and other. The effective effect device was shunned from the audio enthusiast, but it was originally necessary and appeared in this world.
|
Since it is an operation item, we guarantee it for 3 months. Repair after round trip free shipping free period (3 months) required consultation. (Cheap)
For 3 months for 3 monthsSellerRepair fee free shipping costs after the repair shipping costs will cause shipping costs and repair charges
Perfect operation expectation with guarantee 93%Operation expectation degree 99% (Re-repair, you can refund returned goods)
No guaranteeWhen purchasing with no claim, no return,
I used it, but it is old and there is no guaranteePerfect motion expectation 10% Operation Expectancy 30%
It is only electrification It is not tested soundPerfect motion expectation 2% Operation Expectancy 20Because it is%
Again with a guarantee is a bargain
Operating work I could use it without any problems, but since it is an old device, please use no claim and no return
There is a trial of the operation or junk
Those who do not have knowledge trying to purchase and repair equipment without guarantee will further expand the failure of the part without problems
About repair skills To repair all manufacturer makers After having graduated with top knowledge at vocational school or college (about 100 per year) After graduating, more than 20 years experience in the top of the work of development, design, construction work Yes (It will be 20 people here) Since it is a work that can be carried out with a radio engineer and a degree of electricity qualification, repair is required for development, design, construction, above the highest technology so it may be dangerous Do not do it easily Please repair only after experiencing all of development, design and construction, that is, it can not be repaired sufficiently with only repair experience We are two people who have experience in development, design, construction, retirement I started an auction after (10 years ago). Purchase trouble items at auction, sell after repairingI guarantee the operation for 3 months after arrival.
Should there be any malfunction other than those mentioned above in normal use during the warranty period, if you can return it by Yu Pack 's fare payment on delivery, it will be returned by freight prepayment after free repair.
In the case of repair impossible, I will refund the amount paid at the time of a successful bid.
We have sent all shipping fee to us as well
Please inform me when there is hope of delivery time
We will guarantee the operation for 3 months.
|
In the unlikely event that a malfunction occurs other than the one described above in the normal usage method during the warranty period, if you can return it by freight collect cash on delivery, it will be returned by freight prepayment after free repair.
In the case of repair impossible, I will refund the amount paid at the time of a successful bid.
We also trade-in equipment that you have in trouble. We will pick you up after consultation after it makes a successful bid (we will decide trade-in price by phone consultation)
Since trouble of the equipment is overlooked as e-mail etc, please be sure to call us by dealings Navi Please be sure to call the time to respond easily
9 am - 6 pm
The cheapness of the price of our selling equipment is proposal at the price about the price when most of the equipment was requested for repair, with repair staff outsourcing 2 persons and exhibition and shipping work by one less individual individual, most of the equipment
| Time | User | Price |
| No bids | ||
