Yamaha YAMAHA DBR12 Powered speaker x 2 sets
| Auction ends | 4 days |
| Bids | no |
| Current price | ¥86,728 $596 |
| Start price | ¥86,728 $596 |
| Buy-now | ¥86,728 $596 |
| Consumption tax | 10% not included |
| Seller | chuya4711 +97520 |
| Condition | New |
| Start time | 2024-04-24T14:23:19+09:00 |
| End time | 2024-05-01T13:05:20+09:00 |
| Auto-prolongation | Turned off |
| Lot number | u1113838725 |
| Seller position | Fukuoka Prefecture |
Yamaha YAMAHA DBR12 Powered speaker x 2 sets
It is a set of 2 units of YAMAHA Powered Speaker DBR12 equipped with a 12 -inch caliber woofer.. Yamaha's Powered Portable Speaker DBR series is the most portable series in the Yamaha PA powered speaker lineup.. The DSP processing, sound design, and mechanism designed technology accumulated through the development of the upper model DSR series and the DXR series has been inherited, and the combination of small weight, high sound quality, and high sound pressure is achieved.. A model with an excellent balance between size and performance equipped with a 12 -inch caliber woofer. DBR12, which can be played with high sound pressure at high sound pressure, does the main speaker and floor monitor.. 【Features】
・ High efficiency 1000W Class-D power amplifier
・ Custom -designed speaker unit
・ Compact, lightweight and robust enclosure
・ Convenient simple mixer
・ Enclosure design that demonstrates high performance on floor monitoring
・ Riging points corresponding to equipment installation
■ High efficiency 1000W Class-D power amplifier. The new design CLASS-D amplifier succeeded in balancing weight and high output. By combining with a high -input speaker unit, it boasts a high output of 1000W * (dynamic power) and a maximum of 132dB SPL (PEAK).. *DBR10 = 700w Dynamic power
■ Custom -designed speaker unit. The high input woofer of the 2.5 -inch diameter voice coil is designed to withstand the large input from the amplifier, and has a small distortion and a clear low frequency range.. In the mid -high range, a compression driver with a 1.4 -inch diameter diaphragm * realizes high -resolution.. *DBR10: 2 inch diameter voice coil 1 inch diameter diaphragm mounted compression driver
■ Compact, lightweight and robust enclosure. The enclosure material uses a lightweight and robust, thick plastic. Easy -to -hold handles that are particular about the grip feel further increased portability.. In addition, the metal grill that covers the front of the speaker not only protects the internal component from the impact during use and when transporting, but also gives a professional impression that does not overload too much on stage and equipment.. ■ Convenient simple mixer. The DBR series has two inputs of CH1 and CH2. CH1 has a microphone, a combo terminal (XLR or TRS Phone connection) that can switch line level, and CH2 has a combination terminal and RCAPIN line level input.. For the output connector's signal, the parallel connection with CH1 or the mixed out of CH1 and CH2 can be selected, making it easy to expand the system.. ■ Enclosure design that demonstrates high performance on floor monitoring. The DBR series has a 50 ° monitor angle that is ideal for installing floor monitors in addition to the pole socket for setting the speaker stand.. By using D-CONTOUR Monitor mode, you can easily build the optimal sound environment for the floor monitor.. Furthermore, DBR12 can be installed on the vocalist floor monitor and keyboard performer stereo sound monitor, which can be installed on the stereo sound field monitor of vocalists.. ■ Riging points corresponding to equipment installation. The enclosure of the DBR series is equipped with a riging point (screw hole for M8), and by combining it with the optional Yamaha Speaker Bracket (wall, ceiling, baton) and commercially available eye bolt, it can also support various facilities. To do. The grill can be removed and the top and bottom can be changed.. * Bracket and eye bolt are not included. 【specification】
・ Format: Bai amplifier 2way bass reflex type powered speaker
・ Playback frequency band (-10db): 52Hz -20kHz
・ Nominal name -oriented angle:
H: 90 °
V: 60 °
・ Speaker unit:
LF: Diameter: 12 "Cone, Voice Coil: 2", Magnet: Ferrite
HF: DIAPHRAGM: 1.4 ", Type: 1" Throat Compression Driver, Magnet: Ferrite
・ Crossover frequency: 2.1kHz: FIR-X TUNING (LINEAR PHASE FIR FILTER)
・ Rated output: Dynamic: 1000 W (LF: 800 W, HF: 200 W) / Continuous: 465 W (LF: 400 W, HF: 65 W)
・ Maximum output sound pressure (actual measured value) IEC NOISE@1m: 131db SPL
・ Input / output connector: input1: combo x1, input2: combo X 1 + RCA PIN X 2 (Unbalanced), Output: XLR3-32 X 1 (CH1 Parallel Through or Ch1 + CH2 MIX)
・ DSP preset: D-control: foh/main, monitor, off
・ Cooling method: Forced air cooling (fan: 4 -speed)
・ Power supply voltage: 100 V 50/60Hz
・ Power consumption: 74W1/8 Output pink noise), 18W (IDLE)
・ Material: Plastic
・ Color: Black
・ Handle: Side X 2
・ Hanging fittings: bottom x 2, Rear X 1 (Fit for M8 x 15 mm Eyeblts)
・ Paul mount socket: 35mm (bottom x 1)
·size:
W: 376mm
H: 601mm
D: 348mm
・ Weight: 15.8 kg
・ Solded speaker bracket: BBS251, BCS251, BWS251-300, BWS251-400
We keep stock products in the Kanto warehouse in addition to the headquarters warehouse (Kitakyushu, Fukuoka). Even if the dispatcher is in Fukuoka Prefecture, depending on the ordered item, if it will be shipped from the Kanto warehouse or order a multiple items, it will be shipped from multiple warehouses and delivered in multiple mouths. There may be. Please note.
It is a set of 2 units of YAMAHA Powered Speaker DBR12 equipped with a 12 -inch caliber woofer.. Yamaha's Powered Portable Speaker DBR series is the most portable series in the Yamaha PA powered speaker lineup.. The DSP processing, sound design, and mechanism designed technology accumulated through the development of the upper model DSR series and the DXR series has been inherited, and the combination of small weight, high sound quality, and high sound pressure is achieved.. A model with an excellent balance between size and performance equipped with a 12 -inch caliber woofer. DBR12, which can be played with high sound pressure at high sound pressure, does the main speaker and floor monitor.. 【Features】
・ High efficiency 1000W Class-D power amplifier
・ Custom -designed speaker unit
・ Compact, lightweight and robust enclosure
・ Convenient simple mixer
・ Enclosure design that demonstrates high performance on floor monitoring
・ Riging points corresponding to equipment installation
■ High efficiency 1000W Class-D power amplifier. The new design CLASS-D amplifier succeeded in balancing weight and high output. By combining with a high -input speaker unit, it boasts a high output of 1000W * (dynamic power) and a maximum of 132dB SPL (PEAK).. *DBR10 = 700w Dynamic power
■ Custom -designed speaker unit. The high input woofer of the 2.5 -inch diameter voice coil is designed to withstand the large input from the amplifier, and has a small distortion and a clear low frequency range.. In the mid -high range, a compression driver with a 1.4 -inch diameter diaphragm * realizes high -resolution.. *DBR10: 2 inch diameter voice coil 1 inch diameter diaphragm mounted compression driver
■ Compact, lightweight and robust enclosure. The enclosure material uses a lightweight and robust, thick plastic. Easy -to -hold handles that are particular about the grip feel further increased portability.. In addition, the metal grill that covers the front of the speaker not only protects the internal component from the impact during use and when transporting, but also gives a professional impression that does not overload too much on stage and equipment.. ■ Convenient simple mixer. The DBR series has two inputs of CH1 and CH2. CH1 has a microphone, a combo terminal (XLR or TRS Phone connection) that can switch line level, and CH2 has a combination terminal and RCAPIN line level input.. For the output connector's signal, the parallel connection with CH1 or the mixed out of CH1 and CH2 can be selected, making it easy to expand the system.. ■ Enclosure design that demonstrates high performance on floor monitoring. The DBR series has a 50 ° monitor angle that is ideal for installing floor monitors in addition to the pole socket for setting the speaker stand.. By using D-CONTOUR Monitor mode, you can easily build the optimal sound environment for the floor monitor.. Furthermore, DBR12 can be installed on the vocalist floor monitor and keyboard performer stereo sound monitor, which can be installed on the stereo sound field monitor of vocalists.. ■ Riging points corresponding to equipment installation. The enclosure of the DBR series is equipped with a riging point (screw hole for M8), and by combining it with the optional Yamaha Speaker Bracket (wall, ceiling, baton) and commercially available eye bolt, it can also support various facilities. To do. The grill can be removed and the top and bottom can be changed.. * Bracket and eye bolt are not included. 【specification】
・ Format: Bai amplifier 2way bass reflex type powered speaker
・ Playback frequency band (-10db): 52Hz -20kHz
・ Nominal name -oriented angle:
H: 90 °
V: 60 °
・ Speaker unit:
LF: Diameter: 12 "Cone, Voice Coil: 2", Magnet: Ferrite
HF: DIAPHRAGM: 1.4 ", Type: 1" Throat Compression Driver, Magnet: Ferrite
・ Crossover frequency: 2.1kHz: FIR-X TUNING (LINEAR PHASE FIR FILTER)
・ Rated output: Dynamic: 1000 W (LF: 800 W, HF: 200 W) / Continuous: 465 W (LF: 400 W, HF: 65 W)
・ Maximum output sound pressure (actual measured value) IEC NOISE@1m: 131db SPL
・ Input / output connector: input1: combo x1, input2: combo X 1 + RCA PIN X 2 (Unbalanced), Output: XLR3-32 X 1 (CH1 Parallel Through or Ch1 + CH2 MIX)
・ DSP preset: D-control: foh/main, monitor, off
・ Cooling method: Forced air cooling (fan: 4 -speed)
・ Power supply voltage: 100 V 50/60Hz
・ Power consumption: 74W1/8 Output pink noise), 18W (IDLE)
・ Material: Plastic
・ Color: Black
・ Handle: Side X 2
・ Hanging fittings: bottom x 2, Rear X 1 (Fit for M8 x 15 mm Eyeblts)
・ Paul mount socket: 35mm (bottom x 1)
·size:
W: 376mm
H: 601mm
D: 348mm
・ Weight: 15.8 kg
・ Solded speaker bracket: BBS251, BCS251, BWS251-300, BWS251-400
We keep stock products in the Kanto warehouse in addition to the headquarters warehouse (Kitakyushu, Fukuoka). Even if the dispatcher is in Fukuoka Prefecture, depending on the ordered item, if it will be shipped from the Kanto warehouse or order a multiple items, it will be shipped from multiple warehouses and delivered in multiple mouths. There may be. Please note.
| Time | User | Price |
| No bids | ||
