Patch Cable 15cm LL OPREX by EX-PRO OP-15cm LL Guitar Patch Cable
| Auction ends | 3 days |
| Bids | no |
| Current price | ¥2,046 $15 |
| Start price | ¥2,046 $15 |
| Buy-now | ¥2,046 $15 |
| Consumption tax | 10% not included |
| Seller | chuya4711 +97652 |
| Condition | New |
| Start time | 2024-05-04T05:49:33+09:00 |
| End time | 2024-05-11T05:49:33+09:00 |
| Auto-prolongation | Turned off |
| Lot number | u1133379825 |
| Seller position | Fukuoka Prefecture |
OPREX by EX-PRO OP-15cm LL Guitar Patch Cable
Like the regular series, it uses a cable that is easy to handle and OPREX original plugs. Since it is intended for wiring in the effector board and rack, we have a wide range of lengths and variations.. By using a plug cap with a length of 25 mm and a minimum class of 12 Φ, it is possible to avoid problems such as noise caused by contact between plugs during wiring and contact with the chassis. Length :15cm
Plug shape: LL
■ Wire rod. The wire rod has been renewed since October 2016. Based on the recent requests of musicians and equipment staff, we have decided to use thin, soft and durable wire materials. As with the previous OPREX cables, it has been reborn as a thin, soft and durable wire while maintaining the point of approaching the sound quality of high-end cables. ■ Plug. You definitely don't want to use cheap phone plugs that are often included with low-cost cables. This is a non-negotiable point! The contact surface with the jack changes due to the difference in the shape of the tip of the phone plug. Therefore, for foreign-made jacks, which are often used in amplifiers and guitars, foreign-made plugs realize a stable connection. Like the original plug produced by Ex-pro, we have produced an OPREX original plug with a shape that is compatible with overseas jacks. And this is also important. It is said that the use of \"iron\" in the contact parts and connections of plugs, jacks, etc. in acoustic cables is absolutely impossible in terms of sound quality. For a long time, magnets were often used to judge whether or not a cable was good. Some low-cost cables still use such plugs. However, the OPREX original plug naturally does not react to magnets!
■ Plug Cap
The function here is to suppress resonance. The adverse effects of the resonance of the plug cap can cause sound blurring and excessive resonance. In order to suppress these, an original cap is made by machined brass. For the caps of the patch series, we are particular about making them as small and lightweight as possible, and our top priority is to prevent strength and resonance. Therefore, the plug caps of the patch series, which are 10 mm shorter than the regular series and manufactured with a thickness of 12 Φ, can avoid problems such as noise caused by contact between plugs and contact with the chassis when wiring in the effector board or rack, and make it easier to handle.
We keep stock products in the Kanto warehouse in addition to the headquarters warehouse (Kitakyushu, Fukuoka). Even if the shipping source is Fukuoka Prefecture, depending on the ordered product, it may be shipped from the Kanto warehouse, or if you order multiple products, it may be shipped from multiple warehouses and delivered in multiple units. Please note.
Like the regular series, it uses a cable that is easy to handle and OPREX original plugs. Since it is intended for wiring in the effector board and rack, we have a wide range of lengths and variations.. By using a plug cap with a length of 25 mm and a minimum class of 12 Φ, it is possible to avoid problems such as noise caused by contact between plugs during wiring and contact with the chassis. Length :15cm
Plug shape: LL
■ Wire rod. The wire rod has been renewed since October 2016. Based on the recent requests of musicians and equipment staff, we have decided to use thin, soft and durable wire materials. As with the previous OPREX cables, it has been reborn as a thin, soft and durable wire while maintaining the point of approaching the sound quality of high-end cables. ■ Plug. You definitely don't want to use cheap phone plugs that are often included with low-cost cables. This is a non-negotiable point! The contact surface with the jack changes due to the difference in the shape of the tip of the phone plug. Therefore, for foreign-made jacks, which are often used in amplifiers and guitars, foreign-made plugs realize a stable connection. Like the original plug produced by Ex-pro, we have produced an OPREX original plug with a shape that is compatible with overseas jacks. And this is also important. It is said that the use of \"iron\" in the contact parts and connections of plugs, jacks, etc. in acoustic cables is absolutely impossible in terms of sound quality. For a long time, magnets were often used to judge whether or not a cable was good. Some low-cost cables still use such plugs. However, the OPREX original plug naturally does not react to magnets!
■ Plug Cap
The function here is to suppress resonance. The adverse effects of the resonance of the plug cap can cause sound blurring and excessive resonance. In order to suppress these, an original cap is made by machined brass. For the caps of the patch series, we are particular about making them as small and lightweight as possible, and our top priority is to prevent strength and resonance. Therefore, the plug caps of the patch series, which are 10 mm shorter than the regular series and manufactured with a thickness of 12 Φ, can avoid problems such as noise caused by contact between plugs and contact with the chassis when wiring in the effector board or rack, and make it easier to handle.
We keep stock products in the Kanto warehouse in addition to the headquarters warehouse (Kitakyushu, Fukuoka). Even if the shipping source is Fukuoka Prefecture, depending on the ordered product, it may be shipped from the Kanto warehouse, or if you order multiple products, it may be shipped from multiple warehouses and delivered in multiple units. Please note.
| Time | User | Price |
| No bids | ||
