◇ Tamiya DF-03 1/10RC Dark Impact New Unbassion
| Auction ends | 3 days |
| Bids | no |
| Current price | ¥19,800 $136 |
| Start price | ¥19,800 $136 |
| Buy-now | ¥19,800 $136 |
| Consumption tax | 0% included |
| Seller | ryusei305 +4945 |
| Condition | New |
| Start time | 2024-05-01T07:48:29+09:00 |
| End time | 2024-05-04T07:48:10+09:00 |
| Auto-prolongation | Turned off |
| Lot number | x1116164349 |
| Seller position | Ibaraki Prefecture |
| Description of item | [Born and raised on the circuit] Developed based on data accumulated in many actual battles, which has been left to the work of the works driver from the prototype stage.. It is an assembly kit of an electric radio control buggy born to fight off -road racing.. While inheriting the traditional Shaft Drive 4WD, the development concept was made to improve the efficiency of the drive system, optimize the weight balance, and secure a sufficient suspension.. In addition, a compact chassis realizes a slim and tight body. In contrast, the rear wing creates a large type, downforce integrated to the wing end plate, and stabilizes the rear.. The tires are equipped with dual block tires K, which demonstrates good grip on all roads. [DF-03 chassis with a traditional shaft 4WD] Adopted a monocoque tab frame with high twisting rigidity. The battery is placed as a center, the RC mechanism is placed on the left and right, the weight balance is excellent, and the oil damper is placed in the wheelbase, so that heavy objects are gathered and mounted in the center, and high driving stability and cornering performance are exhibited. Masu. The gear box before and after the built -in high -performance balldef is compact size. Especially at the front, the beber gear at the tip of the propeller shaft directly engage with the ball -defined carrier, abolishing the secondary deceleration such as counter gear.. The driving efficiency has been improved by placing the propeller shaft in the shortest distance and the ball bearing is standard equipment.. Furthermore, the 4 -wheel double wishbone suspension uses a long arm with excellent ground.. The axis of the arm uses stainless steel pins to create smooth movements, equipped with a small upright to reduce the lower weight of the spring.. In addition, you can choose the mounting position of the upper arm and oil damper, and a wide range of settings is possible.. [Basic specifications] ● 387 mm in width ● Total height 245mm ● Wheel base 272mm ● Car body weight 1156g ● Told Width/Diameter = F33/87mm R43/87mm Tab ● Driving method = Shaft Drive 4WD ● Def Gear = Before and rear Ball Def ● Steering = 3 division tie rod type ● Suspension = 4 -wheel double Wishbone ● Damper = F: CVA Oil Damper Mini R: CVA Oil Damper Short ● Gear ratio = 9.17: 1 ● Motor = RS540 Type ● Speed controller = ESC specification Please note that new, non -assembled, small scratches on boxes, etc.. |
This item descriptionAuction successful bid market site "Oak fan" exhibition templateIt is created in.
Powered by Aucfan.com
| Time | User | Price |
| No bids | ||
